/COM,ANSYS RELEASE 11.0SP1 UP20070830       09:57:10    11/12/2015

 *** ERROR ***                           CP =       3.094   TIME= 10:17:23
 This function requires selected lines.                                  
  No lines are currently selected.                                       

 *** ERROR ***                           CP =       4.672   TIME= 10:29:30
 There are no nodes defined.                                             

 *** WARNING ***                         CP =      10.734   TIME= 10:44:52
 Forces on unmeshed keypoint 5 are not transferred.                      

 *** ERROR ***                           CP =      10.734   TIME= 10:44:52
 There are no nodes defined.                                             

 *** ERROR ***                           CP =      11.234   TIME= 10:46:52
 This function requires defined nodes.                                   
  No nodes are currently defined.                                        

 *** ERROR ***                           CP =      11.359   TIME= 10:47:00
 This function requires defined nodes.                                   
  No nodes are currently defined.                                        

 *** ERROR ***                           CP =      11.375   TIME= 10:47:11
 This function requires defined nodes.                                   
  No nodes are currently defined.                                        

 *** ERROR ***                           CP =      14.422   TIME= 10:55:30
 Element 1 requires material properties and references material number 1 
 for which no properties are defined.  Checking terminates.              

 *** WARNING ***                         CP =      14.453   TIME= 10:55:34
 No constraints have been defined using the D command.                   

 *** ERROR ***                           CP =      14.453   TIME= 10:55:34
 The step data was checked and there were errors found.                  
  Please check output or errors file (                                   
 C:\Users\admin\Desktop\Рабаданов\dz1.err ) for messages.                

 *** ERROR ***                           CP =      16.828   TIME= 10:58:29
 Element 1 requires material properties and references material number 1 
 for which no properties are defined.  Checking terminates.              

 *** WARNING ***                         CP =      16.844   TIME= 10:58:30
 No constraints have been defined using the D command.                   

 *** ERROR ***                           CP =      16.844   TIME= 10:58:30
 The step data was checked and there were errors found.                  
  Please check output or errors file (                                   
 C:\Users\admin\Desktop\Рабаданов\dz1.err ) for messages.                

 *** ERROR ***                           CP =      16.938   TIME= 10:59:00
 Element 1 requires material properties and references material number 1 
 for which no properties are defined.  Checking terminates.              

 *** WARNING ***                         CP =      16.984   TIME= 10:59:40
 No constraints have been defined using the D command.                   

 *** ERROR ***                           CP =      16.984   TIME= 10:59:40
 The step data was checked and there were errors found.                  
  Please check output or errors file (                                   
 C:\Users\admin\Desktop\Рабаданов\dz1.err ) for messages.                

 *** WARNING ***                         CP =      18.141   TIME= 11:02:31
 No constraints have been defined using the D command.                   

 *** WARNING ***                         CP =      18.328   TIME= 11:02:34
 Small negative equation solver pivot term encountered at UX DOF of node 
 15.  Check for an insufficiently constrained model.                     

 *** ERROR ***                           CP =      18.328   TIME= 11:02:35
 The value of UZ at node 41 is 2.064642086E+14.  It is greater than the  
 current limit of 1000000.  This generally indicates rigid body motion   
 as a result of an unconstrained model.  Verify that your model is       
 properly constrained.                                                   

 *** WARNING ***                         CP =      18.547   TIME= 11:02:54
 No constraints have been defined using the D command.                   

 *** WARNING ***                         CP =      18.750   TIME= 11:02:59
 Small negative equation solver pivot term encountered at UX DOF of node 
 15.  Check for an insufficiently constrained model.                     

 *** ERROR ***                           CP =      18.750   TIME= 11:02:59
 The value of UZ at node 41 is 2.064642086E+14.  It is greater than the  
 current limit of 1000000.  This generally indicates rigid body motion   
 as a result of an unconstrained model.  Verify that your model is       
 properly constrained.                                                   

 *** WARNING ***                         CP =      20.000   TIME= 11:07:46
 No constraints have been defined using the D command.                   

 *** WARNING ***                         CP =      20.172   TIME= 11:07:50
 Small negative equation solver pivot term encountered at UX DOF of node 
 15.  Check for an insufficiently constrained model.                     

 *** ERROR ***                           CP =      20.172   TIME= 11:07:50
 The value of UZ at node 41 is 2.064642086E+14.  It is greater than the  
 current limit of 1000000.  This generally indicates rigid body motion   
 as a result of an unconstrained model.  Verify that your model is       
 properly constrained.                                                   

 *** ERROR ***                           CP =      23.266   TIME= 11:17:13
 This function requires selected lines.                                  
  No lines are currently selected.                                       

 *** ERROR ***                           CP =      24.203   TIME= 11:19:26
 No DOF labels specified on the DK command.                              
/COM,ANSYS RELEASE 11.0SP1 UP20070830       11:28:10    11/12/2015